Grav Labs 16mm Taster Pipe with Silicone Skin

$25.00

Grav Labs, hands down are the masters of glass, scientific producers of glass if you will. A global reputation that is hard to surpass. Built to last, highly functional and as gorgeous as glass can get. Those in the know only and always use Grav Labs glass.

FEATURES

Sometimes a one-hitter is all you need. Easy to pack, use and transport. The 16mm Grav Octo-Taster with Silicone Skin may be the best one-hitter I have seen in a while. Firstly, as this is Grav you know that only the highest quality glass is used. I’m holding one right now and the glass has the look and smooth feel of a quality pipe. The silicone skin adds to the aesthetic appeal and is easily removable for cleaning.

The length of the glass measures in at just under 8.5cms but that’s minus the silicone skin which sits partially around the glass. This skin serves 2 purposes – to act as a shock absorber and as a cap for when you pre-load your pipe. The silicone skin is quite thick and should do quite a good job of protecting the glass whilst still allowing you to see within. One end of the easily removable skin acts as a cap whilst the other end tapers to an ergonomic mouthpiece. This mouthpiece is pinched and acts as an effective ash catcher.

My eagle-eyed customers would have noticed that I also sell the 12mm Grav One Hitter, so why go for this version then? Aside from the fact that it is slightly larger (wider) the one big difference between the 2 is the inclusion of an internal glass screen for an extra layer of filtration. So just to clarify, the Grav Octo-Taster works double hard to ensure that no ash enters your mouth helping to provide you with the purest experience available.

Total measurement including silicone skin = 10cms.

USAGE

Remove the silicone cap from the end of the taster when you are ready to load. 2 loading options are available; either hold the taster with the mouthpiece face down and place your material directly within by hand or with the mouthpiece facing up you can gently push down the taster into your material (chopped/ground up). Twist from side to side till filled. Replace the cap for later use or light.

CLEANING

Completely remove the silicone skin and wash in warm soapy. You may do the same with the glass portion or use Isopropyl Alcohol for stubborn gunk. A further method to consider (especially if you are very lazy!) is the Resremover pouch – simply add water to the contents of the pouch and place your pipe (silicone-less of course!) within. Shake and wait before rinsing and allowing to dry. You can reuse the pouch over and over again for chemical free cleaning.

CONTAINS

x1 16mm Grav Taster with removeable Silicone Skin

SPECS

  • made/designed by Stephan Peirce
  • length height: 4″/10cms
  • 13mm tubing
  • Borosilicate glass
  • use with: Flower

**This is a collectors item and at We are Lux we don’t encourage the breaking of any Australian laws.**

Colour

Light Green, Black, Blue, Teal, Yellow

SKU: N/A Categories: , , , Tag:
Updating…
  • No products in the cart.