Hydrology 9 Vaporiser

$400.00

2 in stock (can be backordered)

SKU: LUXHYDROLOGY9 Categories: , ,

This one of a kind very fancy looking dry herb vaporiser has a built-in water filtration system to cool down the vapor, not something you will find in most other vaporisers. A true cutting edge device. It has 5 temperature settings and an LED light indicator system. This is a very advanced unit built with anti-rust spacecraft grade aluminium alloy, borosilicate glass (AKA very strong glass that isn’t affected by changes in temperature) and a complete 360° anti-leak mechanism. The patent pending “tunnel tube” built in water filtration system facilitates cleaner and smoother inhalations. Even though water is held within the unit it has been designed to be completely leak proof no matter what the movement.

This unit has a generously deep ceramic heating chamber located at the base and includes an integrated stirrer to promote movement within the chamber, thus a more even burn and less wastage. The porcelain chamber has precise temperature control via a microchip, precisely monitoring the oven temperature and making adjustments within milliseconds to any changes in oven temperature. The stirrer has been designed to allow you to stir the contents (dry herb) during your session without having to expose the heating chamber. For a consistent burn I always recommend that you use a grinder to ensure uniformity in your dry herb. Standing at 7″ tall, this is probably not going to be a unit you travel around with a lot (not unless you get the sexy leather case specially designed for the Hydrology 9).

The Hydrology 9 implements a magnetic mouthpiece. Its detachable borosilicate mouthpiece has an anti-leak liquid valve for fuss-free cleaning and exceptional comfort. The magnetic mouthpiece is both functional and user-friendly.

The dry herb vaporiser has two separate air intake vents which are adjustable to your personal preference. This useful feature not only drastically improves the vaping experience, but it is completely unique to the Hydrology9.  A simple twist of the vent allows the user to adjust the draw-resistance according to personal preference.

The Hydrology 9 vape is furnished with a 2000mAh lithium polymer battery, which fully charges in two to three hours. The battery lasts approximately 15 sessions. The Hydrology 9 vaporiser reaches its initial temperature in about 60 seconds, a comparably fast heating time to other portable dry herb vaporisers.

As with other dry herb units it is highly recommended that you sterilise the unit. To start power on by pressing 3 times. Use the button to then toggle through the 5 temperature settings (1 push each to move to next colour/level) till you reach the highest temperature (red for hottest to sterilise). Once the red light stops flashing and turns a solid green the unit will automatically begin to heat (inhalation mode) so set it aside for a full heating cycle. The unit automatically powers down after 10 minutes of non-use. Repeat this process 3 times.  This should remove any manufacturing debris left within the unit.

LED Light Colours:

Flashing Blue 1st degree – lowest temperature
Flashing Yellow 2nd degree
Flashing Orange 3rd degree
Flashing Purple 4th degree
Flashing Red 5th degree – highest temperature
Flashing Green Desired temperature is reached. Inhale
Solid Light Blue Standby mode – session complete

For added fun and to impress your friends you can activate a bonus slow light show cycle, apply pressure to the power button for three seconds while the vaporiser is on but not in the process of heating. Follow the same procedure to end the Hydrology 9’s slow light cycle. For the fast light cycle, press the power button while the Hydrology 9 is on and heating. Do the same to end the rapid light cycle.

The LED Lights also let you know the current battery level and is prompted by holding the button for three seconds when the unit is powered off.

Red Low Battery – Recharge NOW!
Blue Medium
Green Battery is full

To use: Twist the bottom chamber cover anti-clockwise to reveal the heating chamber. Fill the chamber with your ground up dry herb material (pack it down but not too tightly) and then twist the bottom chamber back into place. Place unit the right side up and twist off the mouthpiece/aluminium anti-leak top cover. Fill this opening with water (Piece water excellent for this unit) – remember to only fill to about 70% of the water chamber. Replace mouth piece/aluminium anti-leak liquid valve and power on (3 pushes), LED light will flash green. Once powered on, the Hydrology 9 takes approximately one minute to heat up to its initial starting temperature – which is indicated with a blue light. Each temperature setting (there are five) is indicated by its own color LED light (see above table). After two minutes, heating ceases and the vaporiser reaches the “ready” temperature in the heating progression, indicated with the green light. Voila you are ready to inhale!

Contains – Hydrology 9 Vaporiser, AC Adapter and charging cable, User manual. 1 long cleaning brush, 1 short cleaning brush, 1 flat head screwdriver and 1 cleaning tool.

This vaporiser is exceptionally easy to clean as most parts screw apart for easy reach. To take the vaporiser apart, just take off the cap and unscrew the mouthpiece. Take out the slotted piece and remove the glass chamber with care. Next, unscrew the water cap and take out the silicone piece. Unscrew the perforated ring. Take off the cap at the bottom which secures the contents in the oven chamber. All the pieces fit together seamlessly and assembly and disassembly are intuitive. Taking this vaporiser apart and putting it together is basically fool-proof, and allows for fuss-free cleaning and maintenance of the device.

Specs:

  • Space grade anodized aluminum alloy body. Borosilicate Glass mouthpiece.
  • 2000mAh lithium polymer battery (safe cell phone grade) Full charge takes 2-3 hours – lasting approximately 15 sessions. Takes approximately 60 seconds to reach optimal heat.
  • Food grade porcelain chamber.
  • Vaporisation chamber dimension – 18 mm x 10 mm
  • Hydrology 9 dimension measures – 45 mm x 175 mm
  • Package dimension measures – 217mm X 130 mm X 70mm
  • 2 Year manufacturers warranty

Contains – Hydrology 9 Vaporiser, AC Adapter and charging cable, User manual. 1 long cleaning brush, 1 short cleaning brush, 1 flat head screwdriver and 1 cleaning tool.

Recommended for purchase with this unit – Hydrology9 leather travel case and Piece water

 

Brand