NRG Tank 5ml Black – by Vaporesso

$50.00

2 in stock (can be backordered)

SKU: LUXVAPNRGTANK5ML Categories: , , , ,

The Vaporesso NRG sub-ohm tank is a masterpiece of everyday vape and cloud chasing. A beautiful tank in my opinion, with a glass and stainless-steel frame. The 5ml capacity should take you through a full day of vaping. This tank comes standard with the following mods: Switcher, Revenger Go, Revenger Kit and Revenger Kit.Diameter = 26.5mm in length and 56mm in height. The NRG Tank is 510 threaded, as is the drip tip.

 

The slide and fill design at the top of the tank makes refilling a breeze, simply locate the arrow and just slide the drip tip to the side. Please take care to not get any e-liquid into the central air-path tube. Once filled simply slide back into position.

Dual adjustable bottom airflow, that if desired can be fully closed. Vaporesso has included a heating insulation layer at the base of the NRG Tank, helping to reduce heat and keeping you safe and relaxed whilst vaping. The fairly wide mesh Delrin drip tip has a specially engineered structure designed to prevent spit backs.

Lets discuss the 2 included coils. NRG Tanks use the Vaporesso line of innovative GT Cores that come in traditional and CCELL Ceramic Coils.  Included coils are listed below.

GT4 – 0.15Ω 30-50w Best at 30-45w
GT8 – 0.15Ω 40-80w Best at 55-70w

For future coil changes there are a number of other cores available for you to experiment with. On a handy side note, SMOK Baby /Big Baby Beast Coils can also be used in the NRG Tank.

The NRG Tank can technically work up to a level of 130w depending on the coil you are using.

To use: Priming your new coil is the first task for any new coil/vaporiser and this is no exception. Priming helps to protect your coil and yourself from dry hits or a burnt horrible taste. Unscrew the tank for the mod (510 threaded) and unscrew the base of the tank from the glass to expose the used coil within (use a paper towel if difficult to unscrew). Remove the coil and screw in the new one. You now need to saturate the cotton within the coil with a little e juice (few drops). Reassemble your tank and screw back onto your mod (at this point it is good practice to check all sealing O rings to ensure no leakage!). Slide open the drip tip and dribble in a little more e-juice just to ensure complete saturation. Place your device to the side for a short while to allow all the e -juice to make its way through. Now time for the primer puffs – without touching the firing button take a few sharp short pulls

Specifications:

  • Dimensions: 2-3/16″ x 15/16″ (Including Drip Tip and Threads)
  • Diameter: 26.5mm
  • 510 Threaded
  • 5ml e-Liquid Capacity
  • Slide-n-Fill Design
  • Unique Mesh Drip Tip to Minimize Spitback
  • Stainless Steel Construction, Glass Tank
  • Wide Bore Delrin Drip Tip, Dual Airflow Slots
  • Adjustable Bottom Airflow Ring
  • Bottom Heat Insulation Layer to Reduce Heat
  • Utilises Vaporesso NRG GT Core Atomiser Heads for Variable Wattage
  • 510 Drip Tip Adapter Included

Contains: 1 NRG Tank, 1 GT4 Core, 1 GT 8 Core, 1 Pyrex replacement glass

Brand